LogBox Connect BLE

» » » Logbox Connect Ble

The new LogBox Connect BLE is a recorder for up to three analog and one digital sensor. The analog channels accept direct connection of thermocouples or Pt100 and sensors for any other quantities with signals in current or voltage.
The digital channel can either record the time of events, as a gate opening, or count pulses from a flow sensor.
The logging interval is configurable and the user can access them at any time by using a PC connected to the LogBox USB interface or an Android smartphone via Bluetooth.
In addition to the NOVUS Experience software, the LogBox-BLE user has an Android application to configure, collect and analyze the logs, and can publish it in the NOVUS Cloud.

4 channels, including:
3 analog inputs:
Analog sensor type: Thermocouples J, K, T, E, N, R, S, B; Pt100; 0-5 V; 0-10 V; 0-50 mV; 0-20 mA; 4-20 mA
1 Digital input: pulses counting, events recording or logger start.
1 PNP digital output: electronic key (to control the power supply of signal transmitters) or alarm.
Alarms: up to 8 alarms, being minimum and maximum per channel.
Internal alarm buzzer
Pt100: 0.12 % of the measuring range.
Thermocouples, mV, V, mA: 0.15 % of measuring range.
Internal sensors: NTC for temperature, internal battery voltage and external source voltage.
Resolution for temperature sensors: 0.1 ° C
Communication Interfaces: USB, Bluetooth 4.1 BLE
Interface with the SCADA system: No
Memory for records: 140.000 with time stamps
Power supply: External 10 to 30 Vdc. Or 4 AA batteries (already included) with typical 1 year
Case: In ABS + PC, protection IP40, 120 (L) x 100 (A) x 40mm (P)
Fixing: cradle fixed in wall by screws or magnetic fixation.
Configuration software: Nx (for USB or PC), LogChart-BLE (Bluetooth smartphone)
3-line display with 4 ½ digits
Record Interval: 1 second to 18 hours
  • Downloads

  • Videos and Tutorials


LogBox-BLE QuickGuide

Download - LogBox-BLE QuickGuide

Selecione a Opção Desejada


(PDF - 0.90 Mb)