N3000 - Universal Process Controller

» » » » N3000 - Universal Process Controller
  • Visualizar imagens do produto N3000
  • Visualizar imagens do produto N3000
  • Visualizar vídeos do produto N3000

N3000 Big Digit Universal Process Contoller is a real breakthrough in versatility for holding in one single instrument all the major features required in the vast majority of industrial processes.


With a sophisticated and consistent software and its advanced truly universal circuitry, the N3000 controller accepts configuration of both input signal and control output through the front keyboard without any internal hardware change.
Power supply for remote loop powered transmitters is standard and is a must for high-end applications.


From the very simple applications as a temperature controller to the most complex systems of distributed control with PLC or SCADA networks, the Universal Process Controller N3000 is the right answer to your needs for industrial or laboratory automation.

 

 



- Double LED display: red for PV (18 mm) and green for SV (13 mm)
- Accepts thermocouples type J, K, T, N, R, S; Pt100 RTD, linear 4-20 mA, 0-50 mV, 0-5 Vdc
- Sampling rate: 4 measurements per second
- Measured value resolution: 12,000 levels
- One digital input for dry contact with 5 programmable functions
- Remote setpoint input for 4-20 mAdc signal
- Dual SPST 3 A / 250 Vac relays and dual SPDT 5 A / 250 Vac relays can be individually programmed for control or alarm
- Isolated 4-20 mA output with 1500-level resolution, maximum 550 ohm load for control or PV/SV retransmission. It can also be configured for digital input or output (10 Vdc / 20 mA)
- Auto tuning PID control. Auto/Manual mode, bumpless transfer
- Programmable Soft start up to 9999 seconds
- Ramp and Soak: 7 programs of up to 7 segments each. Can be linked to create longer programs of up to 49 segments

- Control output update: 250 ms
- Up to four configurable relays, two timer alarms
- Alarm functions: LO, HI, differential, differential LO, differential HI, sensor break and event
- Alarm initial blocking function
- Power: 100 to 240 Vac, 50/60 Hz; optional 24 Vdc/ac
- Maximum consumption: 3 VA
- 24 Vdc / 30 mA supply output for remote transmitter excitation
- RS485 comm with Modbus RTU protocol (optional)
- Front panel: IP65, Polycarbonate UL94 V-2
- Back panel: IP30, ABS + PC UL94 V-0
- Circuitry can be removed from the front panel
- Operating environment: 0 to 55 ºC, 20 to 85 % RH
- Dimensions: 96 x 96 x 92 mm, 1/4 DIN
- Panel cutout: 93 x 93 mm
- Weight: 330 g

 

 

 

 

 

 

 


        
  • 8300200130

    N3000 USB Process Controller In: Universal/Out: pulse, 4-20mA, 4 relays 96x96 mm

  • 8300200130

    N3000 USB Process controller, 4 relays, 96x96 mm

  • 8300200134

    N3000 USB 24V Process controller, 4 relays, 96x96 mm

  • 8300200220

    N3000 USB RS485 Process controller, 4 relays, 96x96 mm

  • 8300200224

    N3000 USB RS485 24V Process controller, 4 relays, 96x96 mm

  • 8830005000

    PT100 STAINLESS STEEL 304 5X30MM CABLE PVC 1,5M 100C

  • 8830015615

    THERMOCOUPLE J PROBE 6X7MM W / SPRING BAIONET SM CONNECTION CABLE FB+FB+SS BRAIDING INSULATED 1,5M 300C

  • 8830016631

    THERMOCOUPLE K HANDLE AND CAB. PVC 2MT W/ CONECTOR MINI, 100C

  • 8806060410

    TxMini-M12-MP (TxMini-M124-20mA + stainless steel case 6x100mm + female conector, 1M cable)

  • 8850000100

    USB port (Mini-B type) panel extension cable 30 cm

  • 8830007700

    PT100 PVC ½ NPT 6X100MM 200C

  • 8830007000

    PT100 STAINLESS STEEL 316 6x50MM ½ BSP CAB LARGE 300C

  • 8830015625

    THERMOCOUPLE J PROBE 6X7MM W / SPRING BAIONET SM CONNECTION CABLE FB+FB+SS BRAIDING INSULATED 2,5M 300C

  • 8806060425

    TxMini-M12-RS485-MP (TxMini-M12-RS485+ stainless steel case 6x100mm + female conector, 1m cable)

  • 8830007750

    PT100 3 STAINLESS STEEL 316 WIRE ½ BSP 6X100MM CABLE 2M PVC 200C

  • 8830007010

    PT100 STAINLESS STEEL 316 6X100MM ½ BSP CAB LARGE 300C

  • 8830015815

    THERMOCOUPLE J PROBE 9X7MM W/SPRING BAIONET LARGE CABLE FB+FB+SS BRAIDING INSULATED 3M 300C

  • 8830007800

    PT100 SILICON 2M ½ BSP STEM 6X100MM, 200C

  • 8830015830

    THERMOCOUPLE J PROBE 8X7MM W/SPRING BAIONET LARGE CABLE FB+FB+SS BRAIDING INSULATED 3M 300C

  • 8830007150

    PT100 STAINLESS STEEL 316 6X150MM ½ BSP CAB LARGE 300C

  • 8830015845

    THERMOCOUPLE J PROBE 8X7MM W/SPRING BAIONET LARGE 18MM + ADAPT 4,5M DIAM 8MM, 300C

  • 8830007450

    PT100 PROBE 6X23MM BAIONET SPRING LARGE CABLE FB+FB+SS BRAIDING INSULATED 1,5M 300C

  • 8830007200

    PT100 STAINLESS STEEL 316 6X100MM ½ NPT CAB LARGE 300C

  • 8830007250

    PT100 STAINLESS STEEL 316 6X200MM ½ BSP CAB LARGE 300C

  • 8830007350

    PT100 STAINLESS STEEL 316 6X300MM ½ BSP CAB LARGE 300C

  • 8830007352

    PT100 STAINLESS STEEL 316 6X300M ½ NPT CAB. LARGE 300C

  • Downloads

  • Videos and Tutorials

1/9/2010

Flyer Universal Process Controller N3000

read more about the Universal Process Controller N3000

Download - Flyer Universal Process Controller N3000

Selecione a Opção Desejada

Save

(PDF - 0.51 Mb)

8/21/2020

Operating Manual N3000 V3.0x D (USB)

Download - Operating Manual N3000 V3.0x D (USB)

Selecione a Opção Desejada

Save

(PDF - 1.04 Mb)

3/25/2020

N1100, N2000 and N3000 Registers Table for MODBUS communication

Download - N1100, N2000 and N3000 Registers Table for MODBUS communication

Selecione a Opção Desejada

Save

(PDF - 0.18 Mb)

9/21/2007

CE - D.O.C. N960 & N3000

CE Declaration of conformidity.

Download - CE - D.O.C. N960 & N3000

Selecione a Opção Desejada

Save

(PDF - 0.07 Mb)

12/19/2019

NConfig Configurator V1.4.4.30

Configuration software.

Download - NConfig Configurator V1.4.4.30

Selecione a Opção Desejada

Save

(ZIP - 11.44 Mb)

6/4/2020

Controllers selection guide

Wide range of industrial process controllers, such as temperature control, humidity, pressure, flow, and other electrically measurable variables, through ON-OFF or PID algorithms with auto tuning.

Download - Controllers selection guide

Selecione a Opção Desejada

Save

(PDF - 0.99 Mb)

8/31/2020

QuickTune Configurator

Software for configuration of N1020, N1040, N1040T, N1050, N480D, N120, N1200, N1200HC, N2000, N960, N3000 controllers and N1040i, N1540, N1500 and N1500LC indicators.

Download - QuickTune Configurator

Selecione a Opção Desejada

Save

(ZIP - 13.01 Mb)

Share:

NOVUS Global Privacy Notice

NOVUS is committed to protect the privacy and security of your personal information. The data that you share with NOVUS allows us to provide a better experience when you use our products and services. We guarantee total privacy to your data, used exclusively for communications between NOVUS and you.

In this statement we affirm:

  1. NOVUS does not sell or negotiate customer information;
  2. Your data are stored in secure and controlled environment;
  3. We use your data only for communications of your interest;
  4. At any time you may opt out of the list;

Please see our complete Privacy Policy

After read our Privacy Policy, chose the option bellow: