Temperature Controller N1040

Home » Products » Process Control & Indication » Controllers » Temperature Controller N1040

Conflict Mineral Free

N1040


Temperature Controller

The microprocessor based N1040 was conceived for low cost applications and yet achieving high degree of accuracy. It features a short depth enclosure of only 70 mm thus reducing panel space considerably. Another important innovation is the exclusive removable wiring connection block which translates into ease of use during installation process.

 

It accepts Pt100 RTDs and thermocouples types J, K and T and features two outputs for control and alarm, universal power supply and automatic tuning of the PID paramenters. The N1040 is set to be the lowest cost temperature controller in the market while keeping high performance standards.



Still, unsure? Ask an expert! Make a Suggestion See all models

- Accepts thermocouples J, K, T and Pt100 RTD without any hardware change or recalibration
- Auto tuning of PID parameters
- Outputs: up to four outputs: PRRR
- The outputs are programmable for main control or alarm
- Alarm functions: low, high, differential, low differential, high differential, sensor break
- Two alarm functions can be directed to one single output
- A very efficient universal switching power supply provides high accuracy conditions even during mains voltage fluctuations
- Safe output function allows the user to set control output conditions in case of sensor break or failure
- LBD (Loop Break Detection) function detects failures in the control loop
- Simplified programming menu makes operator programming very easy
- Indelible electronic serial number with 8 digits can be accessed from the display
- Keypad protection prevents unauthorized programming changes
- Silicone rubber frontal keypad
- Dimensions: 48 x 48 mm, 1/16 DIN
- Front panel protecion: IP65
- Interface RS485

 

 


        
4/14/2021

Temperature Controller N1040 - Flyer

Read more about theTemperature Controller N1040

Download - Temperature Controller N1040 - Flyer

Selecione a Opção Desejada

Save

(PDF - 0.50 Mb)

1/20/2021

Operating Manual N1040

Download - Operating Manual N1040

Selecione a Opção Desejada

Save

(PDF - 0.39 Mb)

5/13/2015

2D Housing Drawing - N1040

Download - 2D Housing Drawing - N1040

Selecione a Opção Desejada

Save

(ZIP - 0.22 Mb)

8/9/2020

CE - D.O.C. N1040

CE Declaration of Conformidity.

Download - CE - D.O.C. N1040

Selecione a Opção Desejada

Save

(PDF - 0.11 Mb)

9/29/2021

Controllers selection guide

Wide range of industrial process controllers, such as temperature control, humidity, pressure, flow, and other electrically measurable variables, through ON-OFF or PID algorithms with auto tuning.

Download - Controllers selection guide

Selecione a Opção Desejada

Save

(PDF - 0.69 Mb)

7/10/2021

Registers Table for MODBUS Communication - N1040

Download - Registers Table for MODBUS Communication - N1040

Selecione a Opção Desejada

Save

(PDF - 0.59 Mb)

  • QuickTune - Configuration Software to controllers and indicators

    QuickTune is a free software tool for parameter configuration of NOVUS controllers and indicators. With its clean interface, any lay or advanced user can friendly access and modify all device functions for proper configuration. Designed for easy and quick commissioning, it provides diagnosis and monitoring resources to field technicians. More than a software, QuickTune is a tool. Furthermore, QuickTune offers the main features to meet most users and profile needs in the industry.

    ...

    7/23/2021 - QuickTune Configurator V1.0.6.00

  • SuperView - Process Supervision Software SCADA

    SuperView is a Supervisory Control and Data Acquisition software (SCADA) that brings to the user a visual development model to create applications. Besides communication with Modbus RTU and Modbus TCP devices, also is posible to use SuperView stations operating in Client or Server modes allowing distributed supervision of a process or system.


    The user can use different kinds of resources that simplify the configuration, bringing flexibility to take decisions when developing the synoptic. Customized access policies for...

  • SuperView Mobile - SCADA Application for Mobile Supervision

    SuperView Mobile is a SCADA (Supervisory Control And Data Acquisition) system developed for users who want to monitor, control and supervise devices in their industrial, commercial or residential plant using Android Smartphones and Tablets. This mobile system provides an easy interface use for advanced users and beginners, in addition to providing a configuration wizard that guides the user to develop a complete application.

     

    Remote communication is carried out using the Modbus TCP protocol over the communication interf...

  • FieldChart - Supervisory and Data Acquisition Software

    FieldChart is a software used for monitor and register data acquired from NOVUS products. It generates real time trends and data lists that can be exported in usable formats like a spread sheet. There are two versions available: FieldChart-Lite and FieldChart-64C.

     

     

    The FieldChart-Lite can register 8 simultaneous channels and it is available for free.

     

     

    The FieldC...

    7/30/2021 - FieldChart-Lite V2.0.3.06

4/14/2021

Temperature Controller N1040 - Flyer

Read more about theTemperature Controller N1040

Download - Temperature Controller N1040 - Flyer

Selecione a Opção Desejada

Save

(PDF - 0.50 Mb)

1/20/2021

Operating Manual N1040

Download - Operating Manual N1040

Selecione a Opção Desejada

Save

(PDF - 0.39 Mb)

5/13/2015

2D Housing Drawing - N1040

Download - 2D Housing Drawing - N1040

Selecione a Opção Desejada

Save

(ZIP - 0.22 Mb)

8/9/2020

CE - D.O.C. N1040

CE Declaration of Conformidity.

Download - CE - D.O.C. N1040

Selecione a Opção Desejada

Save

(PDF - 0.11 Mb)

9/29/2021

Controllers selection guide

Wide range of industrial process controllers, such as temperature control, humidity, pressure, flow, and other electrically measurable variables, through ON-OFF or PID algorithms with auto tuning.

Download - Controllers selection guide

Selecione a Opção Desejada

Save

(PDF - 0.69 Mb)

7/10/2021

Registers Table for MODBUS Communication - N1040

Download - Registers Table for MODBUS Communication - N1040

Selecione a Opção Desejada

Save

(PDF - 0.59 Mb)

  • 8104210014

    N1040-PR USB 24V Temp. controller, 1 relay + pulse out, 48x48 mm

  • 8104210000

    N1040-PR-USB Temp. controller, 1 relay + pulse out, 48x48 mm

  • 8104211200

    N1040-PRR USB Temp. controller, 3 relays out, 48x48 mm

  • 8104211210

    N1040-PRR USB 24V Temp. controller, 2 relays + pulse out, 48x48 mm

  • 8104211307

    N1040 – PRRR – 485 USB

  • 8830005000

    PT100 STAINLESS STEEL 304 5X30MM CABLE PVC 1,5M 100C

  • 8830016631

    THERMOCOUPLE K HANDLE AND CAB. PVC 2MT W/ CONECTOR MINI, 100C

  • 8806060410

    TxMini-M12-MP (TxMini-M124-20mA + stainless steel case 6x100mm + female conector, 1M cable)

  • 8830007700

    PT100 PVC ½ NPT 6X100MM 200C

  • 8830015625

    THERMOCOUPLE J PROBE 6X7MM W / SPRING BAIONET SM CONNECTION CABLE FB+FB+SS BRAIDING INSULATED 2,5M 300C

  • 8806060425

    TxMini-M12-RS485-MP (TxMini-M12-RS485+ stainless steel case 6x100mm + female conector, 1m cable)

  • 8830007750

    PT100 3 STAINLESS STEEL 316 WIRE ½ BSP 6X100MM CABLE 2M PVC 200C

  • 8830007010

    PT100 STAINLESS STEEL 316 6X100MM ½ BSP CAB LARGE 300C

  • 8830007800

    PT100 SILICON 2M ½ BSP STEM 6X100MM, 200C

  • 8830007150

    PT100 STAINLESS STEEL 316 6X150MM ½ BSP CAB LARGE 300C

  • 8830007200

    PT100 STAINLESS STEEL 316 6X100MM ½ NPT CAB LARGE 300C

  • 8830007350

    PT100 STAINLESS STEEL 316 6X300MM ½ BSP CAB LARGE 300C

  • 8830007352

    PT100 STAINLESS STEEL 316 6X300M ½ NPT CAB. LARGE 300C

Share: