Micro PLC in C/C++ DigiRail NXprog

Home » Products » Data Acquisition & Communication » I/o Modules » Micro Plc in C/c++ Digirail Nxprog

01 - ISO 900102 - Reach Compliance03 - RoHS06 - CE07 - UKCA11 - Ensured Accuracy15 - NXperience

DigiRail NXprog


Micro PLC in C/C++

DigiRail NXprog gathers the best of both, easy programming of Arduino community and industrial device reliability and robustness for automation applications. Its integrated I/O handles analog and digital signals, allowing DigiRail NXprog be used as an I/O extension of standard automation systems or as a brain of custom applications, with local and agile decision making.

Arduino compatible, DigiRail NXprog enables the use of high level programming languages such as C / C ++ that enable the user to implement complex algorithms such as recursive logic, state machines, statistical analysis and mathematical equations. This is an excellent advantage over the mid-level programming hardship (IEC standard) found on most PLCs in the global market, with a lower adherence by the new generation of automation technicians.

 

Access our Arduino library on GitHub: https://github.com/NOVUS-Products/DigiRail-NXprog

Designed especially for harsh environments, DigiRail NXprog demystifies the use of Arduino compatible devices for the industry, being the perfect combination of ruggedness with easy programming. The RS485 interface allows communication with other Modbus RTU protocol devices, either as a master or slave. DigiRail NXprog also has Modbus TCP protocol through an Ethernet port, which increases the applicability of the equipment with SCADA management or control systems. Flexible for receiving protocols from Arduino community libraries or implementing custom protocols, DigiRail NXprog enables a variety of applications with machines or processes connectivity.



Still, unsure? Ask an expert! Make a Suggestion See all models

- Inputs:
  RAMIX: 4 digital and 2 analog (isolated)


- Outputs:
  RAMIX: 3 digital or 2 relay and 2 analog (isolated)


- Analog signals:
  Thermocouples J, K, T, N, E, R, S and B
  Pt100, Pt1000, NTC,
  0-60 mV, 0-5 V, 0-10 V, 0-20 mA, 4-20 mA


- Analog input impedance:
  0-60 mV, Pt100, Pt1000, NTC and thermocouples: >10 MΩ
  0-5 V, 0-10 V: >1 MΩ
  4-20 mA: 15 Ω + (1 V @ 20 mA)


- Digital Input characteristics:
  Logical level "0": < 0.5 V
  Logical level "1": > 3 V
  Maximum voltage: 30 V
  Input impedance:270 kΩ
  Input current: @ 30 Vdc (typical) 0.15 mA
  Maximum frequency (square wave):
  Dry contact: 10 Hz
  PNP: 250 Hz
  NPN: 250 Hz


- Digital Output characteristics:
  Maximum load current: 200 mA
  Short circuit current: 70 mA
  Maximum switching voltage: 30 Vdc
  Minimum switching voltage: 6 Vdc


- Relay Output characteristics:
  Type: SPST-NO and SPDT
  Maximum load current: 3 A (SPST) / 6 A (SPDT)
  Switching voltage: 250 Vac
  Suitable for resistive loads


- Analog Output characteristics:
  Signal types: 0-20 mA, 4-20 mA, 0-10 V
  Maximum load: 0-20 / 4-20 mA: ≤ 500 Ω
  0-10 V: ≥ 2000 Ω


- Analog Channel resolution:
  Analog inputs: 16 bits (65000 levels)
  Analog outputs: 12 bits


- Communication interface:
  USB
  Ethernet: 10/100 Mb/s, IEEE standard 802.3u
  RS485


- Software:
  NXperience (via USB)


- Power Supply:
  Voltage: 10 Vdc to 36 Vdc
  Maximum Consumption: 5 W
  Typical Consumption: 20 mA


- Operating conditions:
  Temperature: -20 to 60°C ( -4 to 140°F)
  Humidity: 5 to 95% RH, non-condensing


- Enclosure: ABS+PC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


        
        
        
        

Related News

Share: