Accessories SCT

Home » Products » Sensing, Conditioning & Transmitters » Accessories Sct

Accessories to NOVUS products complementing the industrial automation solutions and facilitating their use in the most diverse applications.


  • Interface for Configuration TxConfig-HRT

    Interface for Configuration

    TxConfig-HRT

    TxConfig-HRT is a configuration interface for transmitters with HART protocol. It is used with the TxConfig software to configure NOVUS HART transmitters.For its installation, the TxConfig-HRT communication interface mus...

  • Interface for Configuration TxConfig USB

    Interface for Configuration

    TxConfig USB

    The TxConfig USB is the configuration interface to configure the whole Novus Smart Transmitters family with 0 to 10Vdc and 4 to 20mA outputs. By using this interface the user can either perform the transmitter configurat...

  • Interface for Transmitters TXCONFIG-DIN

    Interface for Transmitters

    TXCONFIG-DIN

    TxConfig DIN is a configuration interface for the entire NOVUS DIN transmitters’ family. It is capable of also supplying power to transmitters with 0-10 Vdc or 4-20 mA output. It is used with TxConfig and TxConfig II con...

  • New

    Non-Intrusive Laser Level Sensor TL400-V

    Non-Intrusive Laser Level Sensor

    TL400-V

    The TL400-V is an advanced level and volume sensor with a non-intrusive approach, making it well-suited to detect liquids, grains, fluids, and bulk solids in static and moving applications. Employing a low-power laser be...

  • Loop Powered Indicator LoopView

    Loop Powered Indicator

    LoopView

    LoopView is a two-wire 4-20 mA loop indicator, low power loop-powered indicator. Its excellent precision allows to indicate several measurements like pressure, differential pressure, flow, pH, temperature, acceleration a...

  • RTD PT100

    RTD

    PT100

    Manufactured with thin film technology on a flat ceramic substrate or wire wound on cylindrical ceramic or with glass body, they provide an excellent means for high accuracy temperature detection.

  • Power Supply FTR

    Power Supply

    FTR

    The FTR power supply is a switching mode power supply to be connected directly to the line proviiding na isolated output. It is suitable for powering instruments such as 4-20 mA field transmitters.The FTR&...

  • Converter USB-i485

    Converter

    USB-i485

    The USB-i485 module is a cost-effective way to convert RS485 or RS422 industrial buses to a USB interface. When connected to a PC USB port the USB-i485 module is automatically detected and is installed as a native COM po...

  • Temperature Sensor NTC Sensor

    Temperature Sensor

    NTC Sensor

    Cable with two tinned copper wires and NTC temperature sensor at one end. The sensor is protected by a stainless steel or rubber capsule, both protected against water ingress. Suitable for heating and cooling application...

  • Power Supply EDA

    Power Supply

    EDA

    The NOVUS EDA Power Supplies have full range voltage input, high efficiency, DIN rail support and operation temperature up to 70 ºC. Attending international standards and certifications they are a robust solution to...

Related News

11/7/2023

Smart Production Solutions with NOVUS

New devices on this Exhibit

9/27/2021

Calibrate your temperature instrument with the quality of NOVUS Metrology Laboratory

NOVUS Metrology Laboratory calibrates various temperature instruments such as thermometers, thermal chambers, baths, temperature sensors, climate chambers, thermohygrometers and temperature, and relative humidity transmitters.

12/5/2019

HART technology is simpler than it seems, and NOVUS can show you that!

Now TxIsoRail-HRT and TxIsoBlock-HRT temperature transmitters can be purchased in a starter kit that put consumers closer to HART Technology.

Share: