Water & Wastewater

Applications

Automation and Monitoring of Treatment Plants
The automation of water and effluent treatment processes using PLCs and supervisory systems optimizes chemical dosing systems and increases efficiency. Records of the process variations allow studies and continuous improvement to be made. Other benefits are: ? Significant increases in the water quality produced; ? Greater plant availability resulting in increased production; ? Decreases in the variations of controlled parameters such as turbidity, color and chemical concentration; ? Improved loss ratio due to a reduction of errors in the treatment process; ? Economized use of chemical products by correcting and adjusting the dosage; ? Automated operation of workstations without the permanent presence of the operator; ? Monitoring and remote control of the process through internet, mobile or corporate networks; ? Process traceability with continuous historical records.
- N20K48
  
  Global innovation product from NOVUS, we proudly release our N20K48 controller family. Its new and consistent concept is based on a compact, powerful core controller plus a growing family of micromodules that enables it ...
- 40 to 90 Ampere (Triphasic)
  
  The Solid State Relays (SSR) are electronic devices used for switching resistive or inductive AC loads with many advantages over the conventional relays. A control voltage applied to the device INPUT turns the SSR ON, en...
- N1040
  
  The microprocessor based N1040 was conceived for low cost applications and yet achieving high degree of accuracy. It features a short depth enclosure of only 70 mm thus reducing panel space considerably. Another importan...
- 10 to 100 Ampere
  
  These electronic devices are used for switching resistive and inductive loads and outperform the conventional mechanical relays with great advantages. The life cycle with millions of operations, the high switching speed ...
- N1030
  
  N1030 is a temperature controller that features a high performance PID algorithm in a compact housing, with only 35 mm depth. Its compact construction and the convenient detachable connector provide an easy set up o...
- RHT-WM and RHT-DM
  
  The RHT-WM and RHT-DM transmitter series incorporate the best high accuracy and great stability relative humidity and temperature sensors. They convert the measured values into linear 4 to 20 mA signals. The microprocess...
- N1040T
  
  N1040T is an economic and efficient Time and Temperature controller, developed with modern technology and automatic tuning of PID parameters, ON-OFF control and totally configurable. It has a reduced depth flameproof pla...
- QuickTune Mobile
  
  A global innovation, QuickTune Mobile is the configuration app for NOVUS' new family of modular controllers, the N20K48. With an intuitive and modern interface, the application allows you to configure the N20K family thr...
- 100 to 300 Ampere
  
  These devices are used for switching single, bi or triphase resistive and inductive loads. They can be triggered directly by digital controllers with Pulsed Width Modulation action thus performing very accurate results a...
- N1050
  
  N1050 is an advanced high performance PID temperature controller featuring a vivid LCD display in a modern design package. It combines the proven robustness of NOVUS PID algorithm with a large and bright easy-to-read mul...
Distribution Monitoring
Utilizing radio equipment or the mobile phone network, field transducers can be monitored remotely from an OCC (Operational Control Center) or on an Internet server Pressure, level, flow and all other important information can be displayed and monitored. ? Variables can be monitored continuously from a central server (NOVUS or own); ? Field equipment can store data locally and provide it when needed; ? Control routines (activating pumps and valves) can be operated locally without input from the central server ensuring operation even through a loss of communication.
- 40 to 90 Ampere (Triphasic)
  
  The Solid State Relays (SSR) are electronic devices used for switching resistive or inductive AC loads with many advantages over the conventional relays. A control voltage applied to the device INPUT turns the SSR ON, en...
- 10 to 100 Ampere
  
  These electronic devices are used for switching resistive and inductive loads and outperform the conventional mechanical relays with great advantages. The life cycle with millions of operations, the high switching speed ...
- QuickTune Mobile
  
  A global innovation, QuickTune Mobile is the configuration app for NOVUS' new family of modular controllers, the N20K48. With an intuitive and modern interface, the application allows you to configure the N20K family thr...
- 100 to 300 Ampere
  
  These devices are used for switching single, bi or triphase resistive and inductive loads. They can be triggered directly by digital controllers with Pulsed Width Modulation action thus performing very accurate results a...
Pump automation
We provide solutions to augment existing pumps by installing automated control panels. Including PLCs, inverters and communications equipment, all control routines and alarms operate in automatic mode. These solutions have the following benefits:
• Increased reliability and flexibility of pump operation (less downtime, improved availability)
• Can be used with different forms of communication that are available (GPRS, MPLS, or even private radio modem / dialup)
• Significant improvements in response times for incidents, as the onsite automation passes all the present and historical information to the server or OCC.
- N20K48
  
  Global innovation product from NOVUS, we proudly release our N20K48 controller family. Its new and consistent concept is based on a compact, powerful core controller plus a growing family of micromodules that enables it ...
- 40 to 90 Ampere (Triphasic)
  
  The Solid State Relays (SSR) are electronic devices used for switching resistive or inductive AC loads with many advantages over the conventional relays. A control voltage applied to the device INPUT turns the SSR ON, en...
- 10 to 100 Ampere
  
  These electronic devices are used for switching resistive and inductive loads and outperform the conventional mechanical relays with great advantages. The life cycle with millions of operations, the high switching speed ...
- QuickTune Mobile
  
  A global innovation, QuickTune Mobile is the configuration app for NOVUS' new family of modular controllers, the N20K48. With an intuitive and modern interface, the application allows you to configure the N20K family thr...
- 100 to 300 Ampere
  
  These devices are used for switching single, bi or triphase resistive and inductive loads. They can be triggered directly by digital controllers with Pulsed Width Modulation action thus performing very accurate results a...
Pump House control - Hot / Cold water supply systems
Integrating NOVUS Drive frequency inverters with the family XL controllers, we have an application dedicated to controlling pump houses. This type of application usually requires the control of temperature and water pressure. Besides the automation of the pumps (that send water to the process), the automation of water cooling and / or heating auxiliaries is also supplied. All devices are connected in digital communication networks, thus bringing process information, consumer information, aiding the function of monitoring the entire system, as well as programming correct predictive and preventive maintenance of equipment.
• Historical data recording systems;
• SCADA distance monitoring systems;
• Generating auditable reports with comparable data on energy-saving gains, inputs, payback, and other analyses that are commonly requested in this application.
- N20K48
  
  Global innovation product from NOVUS, we proudly release our N20K48 controller family. Its new and consistent concept is based on a compact, powerful core controller plus a growing family of micromodules that enables it ...
- 40 to 90 Ampere (Triphasic)
  
  The Solid State Relays (SSR) are electronic devices used for switching resistive or inductive AC loads with many advantages over the conventional relays. A control voltage applied to the device INPUT turns the SSR ON, en...
- 10 to 100 Ampere
  
  These electronic devices are used for switching resistive and inductive loads and outperform the conventional mechanical relays with great advantages. The life cycle with millions of operations, the high switching speed ...
- QuickTune Mobile
  
  A global innovation, QuickTune Mobile is the configuration app for NOVUS' new family of modular controllers, the N20K48. With an intuitive and modern interface, the application allows you to configure the N20K family thr...
- 100 to 300 Ampere
  
  These devices are used for switching single, bi or triphase resistive and inductive loads. They can be triggered directly by digital controllers with Pulsed Width Modulation action thus performing very accurate results a...