Infrastructure

In the industrial and infrastructure sectors it is frequently required to measure, record and control the energy consumption of equipment and processes. With this in mind, NOVUS has developed systems to measure single and three phase power usage. With data in hand, our process controllers can take corrective and preventive actions, and store historical data for future analysis. All this collected data can be made available for access anywhere through the NOVUS cloud system, composed of GPRS gateways, 3G, Ethernet and dedicated Web servers.

• 

  40 to 90 Ampere (Triphasic)

  The Solid State Relays (SSR) are electronic devices used for switching resistive or inductive AC loads with many advantages over the conventional relays. A control voltage applied to the device INPUT turns the SSR ON, en...
• 

  10 to 100 Ampere

  These electronic devices are used for switching resistive and inductive loads and outperform the conventional mechanical relays with great advantages. The life cycle with millions of operations, the high switching speed ...
• 

  QuickTune Mobile

  A global innovation, QuickTune Mobile is the configuration app for NOVUS' new family of modular controllers, the N20K48. With an intuitive and modern interface, the application allows you to configure the N20K family thr...
• 

  100 to 300 Ampere

  These devices are used for switching single, bi or triphase resistive and inductive loads. They can be triggered directly by digital controllers with Pulsed Width Modulation action thus performing very accurate results a...

In the infrastructure sector it is a very common demand for equipment to be enabled to monitor data remotely. NOVUS, thinking of this need, has created products that integrate and realize this task simply and reliably. The AirGate GPRS and 3G AirGate gateways are prepared to connect to our Web servers and provide global access to field data. Data collection can be done in many ways with our signal conditioners and the responsibility to store data in the Cloud. If you still need to add onsite control and remote access to the system, XL family controllers with embedded HMI can be added to the architecture to improve the functionality of the system.

• 

  40 to 90 Ampere (Triphasic)

  The Solid State Relays (SSR) are electronic devices used for switching resistive or inductive AC loads with many advantages over the conventional relays. A control voltage applied to the device INPUT turns the SSR ON, en...
• 

  10 to 100 Ampere

  These electronic devices are used for switching resistive and inductive loads and outperform the conventional mechanical relays with great advantages. The life cycle with millions of operations, the high switching speed ...
• 

  QuickTune Mobile

  A global innovation, QuickTune Mobile is the configuration app for NOVUS' new family of modular controllers, the N20K48. With an intuitive and modern interface, the application allows you to configure the N20K family thr...
• 

  100 to 300 Ampere

  These devices are used for switching single, bi or triphase resistive and inductive loads. They can be triggered directly by digital controllers with Pulsed Width Modulation action thus performing very accurate results a...

Overhead cranes are widely used in companies that need to move large parts inside their warehouses. Synchrony and assertiveness in the movement direction are extremely relevant factors for this kind of component transport. Without these factors the large parts could fall, consequently, causing accidents and financial losses. Often, depending on the size of the object, it is necessary to use more than one associated bridge crane to succeed in moving the materials.

A Brazilian aviation company uses two parallel bridge cranes to carry parts of aircraft, such as wings. To ensure that there are no problems between the two bridge cranes a system was required to prevent asynchrony since even a simple power failure could interfere with the system's operation. A NOVUS solution was developed with a provider partnership for customer safety. Consisting in a PLC - Programmable Logic Controller - monitoring the variable-frequency drives and an AirGate Modbus communicating between the two bridge cranes. The application can immediately send a command that interrupts the operation of the two bridges when there is a difference of direction or speed between them. The NOVUS gateway was chosen mainly for two reasons. The first one its wireless communication, so that it wouldn’t interfere in the mobility of the bridges. The second one is the reliability in the communication link, essential to identify any failure instantly. This solution guarantees the safety of the items transported and prevents accidents.

Economy: with AirGate Modbus communication system you save time.
Safety: for accident prevention and material loss.
Link Reliability: secure communication between the two overhead cranes.

• 

  40 to 90 Ampere (Triphasic)

  The Solid State Relays (SSR) are electronic devices used for switching resistive or inductive AC loads with many advantages over the conventional relays. A control voltage applied to the device INPUT turns the SSR ON, en...
• 

  AirGate-Modbus

  AirGate-Modbus is a gateway designed to create a network of wireless sensors.It can be used as extender of Modbus RS485 network and offers flexibility and scalability for the various networks inside facilities. It has lo...
• 

  10 to 100 Ampere

  These electronic devices are used for switching resistive and inductive loads and outperform the conventional mechanical relays with great advantages. The life cycle with millions of operations, the high switching speed ...
• 

  QuickTune Mobile

  A global innovation, QuickTune Mobile is the configuration app for NOVUS' new family of modular controllers, the N20K48. With an intuitive and modern interface, the application allows you to configure the N20K family thr...
• 

  100 to 300 Ampere

  These devices are used for switching single, bi or triphase resistive and inductive loads. They can be triggered directly by digital controllers with Pulsed Width Modulation action thus performing very accurate results a...

Integrating NOVUS Drive frequency inverters with the family XL controllers, we have an application dedicated to controlling pump houses. This type of application usually requires the control of temperature and water pressure. Besides the automation of the pumps (that send water to the process), the automation of water cooling and / or heating auxiliaries is also supplied. All devices are connected in digital communication networks, thus bringing process information, consumer information, aiding the function of monitoring the entire system, as well as programming correct predictive and preventive maintenance of equipment.
• Historical data recording systems;
• SCADA distance monitoring systems;
• Generating auditable reports with comparable data on energy-saving gains, inputs, payback, and other analyses that are commonly requested in this application.

• 

  N20K48

  Global innovation product from NOVUS, we proudly release our N20K48 controller family. Its new and consistent concept is based on a compact, powerful core controller plus a growing family of micromodules that enables it ...
• 

  40 to 90 Ampere (Triphasic)

  The Solid State Relays (SSR) are electronic devices used for switching resistive or inductive AC loads with many advantages over the conventional relays. A control voltage applied to the device INPUT turns the SSR ON, en...
• 

  10 to 100 Ampere

  These electronic devices are used for switching resistive and inductive loads and outperform the conventional mechanical relays with great advantages. The life cycle with millions of operations, the high switching speed ...
• 

  QuickTune Mobile

  A global innovation, QuickTune Mobile is the configuration app for NOVUS' new family of modular controllers, the N20K48. With an intuitive and modern interface, the application allows you to configure the N20K family thr...
• 

  100 to 300 Ampere

  These devices are used for switching single, bi or triphase resistive and inductive loads. They can be triggered directly by digital controllers with Pulsed Width Modulation action thus performing very accurate results a...